Valken Alloy Series MK. I Full Metal KeyMod CQB AEG Airsoft Rifle 86094

Description

MODEL:
Valken Alloy Series MK. I Full Metal AEG Airsoft Rifle
Item #
86094
The Valken Alloy Series AEG rifles are their premier line of full metal AEG's. The durable, high quality, aluminum alloy receivers are milled to finish and hard coated to create a tough exterior. Also, combined with a mil-spec CNC machined free floating rail system and 1-piece metal, lightweight outer barrel make the Alloy series rifles one of the strongest on the market. Inside the Alloy series rifle is an 8mm version 2 gearbox with a steel bushing on the sector and spur gears, and a bearing on the bevel gear. The 18:1 ratio gears complimented with full metal teeth piston with the second tooth removed make for consistent engagement with every cycle.
The micro switch trigger was designed and tested with an 11.1v lithium polymer battery, which presents a crisp trigger break and reset for a fast response. The gearbox also features a quick-change spring system, metal selector plate, and a low-resistance, steel wiring harness that is clearly marked positive and negative. For improved accuracy and air seal, the inner barrel assembly is comprised of a 70D full seal bucking, 1-piece polymer hop-up unit with precision adjustment, and carbon steel 6.03mm inner barrel.
Covered by Valken's Bulletproof 1-Year Warranty, and includes AEG, hi-cap flash magazine, instruction manual, Allen key, un-jamming/cleaning rod, and safety marking tape.
Features
High strength, lightweight aluminum alloy receiver
Upgraded full metal reinforced 8mm Version 2 gearbox
Velocity: 340 - 360 FPS with .20g BBs
Length (retracted): 23.8" / 60.5 cm
Length (extended): 27" / 68.5 cm
Outer Barrel Length: 6"
Inner Barrel Length: 200 mm
Weight: 4.76 lbs / 2.16 kg
Fire Modes: Safe, Semi Auto, Full Auto
Adjustable hop up system
Gearbox is pre-upgraded with SHS 18:1 gear set and high speed motor
Built-in micro switch trigger regulates electrical flow and protects trigger contacts
Micro switch trigger provides an extremely responsive trigger for faster firing on semi auto
Steel 6.03 tight bore inner barrel for enhanced range and accuracy
Full rack metal tooth piston, with 2nd tooth removed, for LIPO ready performance
Quick change spring guide for easily adjusting FPS to meet field requirements
Free floating CNC machined 6" KeyMod hand guard for modular accessories
Hand guard has picatinny rail section at the front for additional accessories
All metal 11" one-piece outer barrel with a 2.5" Compensator
Continuous top rail for a variety of sights, scopes and optics
High density polymer flip-up front and rear adjustable sights
Ambidextrous rear sling loop
Collapsible 6-position crane stock - houses the battery
Backed by Valken Inc. 1-Year Bulletproof Warranty
Package Includes
Valken Tactical Alloy Series MK. I CQB Airsoft Rifle
1x 350rd hi-cap magazine
1x allen key
Cleaning / unjamming rod
Instruction manual
This airsoft gun contains the colored markings required by law, including a permanently attached orange plug
Payments are accepted through
PAYPAL
NO INTERNATIONAL SHIPPING.
All Items will ship out next business day. Items will be shipped out via UPS/USPS and take between 1-5 business days depending on where you are located in the US
(we offer expedited shipping at an additional cost).
If you have purchased this item and wish for it to be sent to your PO box/APO address it will have to be sent via USPS at an additional charge as
UPS does NOT ship to PO/APO boxes
.
TRACKING:
Tracking information is entered into PAYPAL and emailed to you as soon as your item is shipped. If you have any further questions regarding your shipment, expedited shipping or error in shipping address please email us through ebay with your corrected address for verification the same day purchased.
THANK YOU IN ADVANCE!
YOU MUST BE 18 OR OLDER TO PURCHASE THIS ITEM.
RETURNS:
Please contact us within
7 business days
of receiving your item for any issues. If you receive your item as DOA - (defective on arrival) please contact us as soon as possible within 7 days of receiving your item so that we may provide you with a return (RMA) # and the return procedure.
NO REFUNDS ARE GIVEN, ALL SALES ARE FINAL.
Once we receive the item we will have a technician verify that it is defective and you will be sent a
REPLACEMENT
item if found to be defective.
Buyer is responsible for all returned shipping costs.
We
DO NOT
refund any shipping fees. If you simply do not want the item and the package is unopened you may return the item at your cost for a full refund minus shipping charges and fees. If you have any questions please email us and we will get back to you within 24-48 hours.
*PLEASE
REMEMBER TO LEAVE POSITIVE FEEDBACK*
We
VALUE
your feedback!
If for any reason you are dissatisfied please contact us and we will do our best to make your experience with us
5 STARS!